Vacuum drying chamber for the food products BKS VF-40

Designation

The kiln is intended for drying food products using new technology, where the main element is modulated infrared radiation emitters.

The main dignity of these chamber is the ability to use them for drying food products of any species and varieties, fresh and as well as specially prepared for drying.

Description

Drying chamber BKS VF-40 is the type of drying chambers with loading pre-packed on pallets products in the working area of drying. The recommended thickness of the product on a pallet no more than 10 mm.

After formatting of package of product on trolley, it put into the kiln. The connecting cables are plug in to the connectors, which are located inside the kiln.

The door closed as follows:

the flange of door brings to the flange of drying apparatus, the vacuum pump switch on, press to the door and retained until created a vacuum inside the dryer. Additional pressing of door is not required. Mechanical locks are used only for transportation purposes.

Vacuum pump block connects to the kiln using a flexible hose. The standard length of the hose is designed for installation vacuum pump behind of kiln. If you need to install a pump to another place, the length of hose needed to specify in advance.

There is power-control unit with programmable drying process controller. Controller has the interface for the connection to PCs, which gives to you the possibility to lay the network cable and to control and regulate the process from the office. In the case of the presence of Internet connection, we can check and correct the work of controller from Estonia.

Technical data

Drying time in depend of the type of products up to 12% humidity

Average time: from 1 to 3 hours.

Cost of drying.

Of the many years of practical experience in the use dryers, we get the following average value: 0.7 - 0.8 kW per liter evaporated water.

Complete

• Body
• One moving trolley
• A set of shelves (40 pcs.)
• The control unit (mounted on the body).
• Vacuum pump block
• Sending way for the trolley.

Conditions

Dryer comes in "stand by» readiness to work. Starting in the work performed immediately after installation dryers at the place and connects the power cord.
The best position of installing the chamber - indoors. For install the kiln it is necessary a flat (preferably paved) place with size - 14 × 3 m. It is necessary to take into account the service area for loading/discharging boards.
The warranty on the product 2 years.
The warranty on used emitters 5 years.
Time of readiness - 3 months from the date of prepayment.
Payment: 100% advance.

Notes:

There is possible the adaptation of chamber for the version corresponding to the concrete demands of customer. For example, you can order the other length of chamber.

In the photos you can see experimental model for research with various types of food products.